ISO3382 Noise Method
#
DescriptionThe ISO3382 Noised Method
block determines the reverberation time based on calculations from ISO 3382-2:2008
Measurement of room acoustic parameters โ Part 2: Reverberation time in ordinary rooms.
The reverberation time is calculated based on the interrupted noise method where a noise signal is interrupted and forms the rooms decay curve. Using exponential averaging the reverberation time T60, T30, or T20 is calculated.
#
InputNoise [P,pos1]
is the interrupted noise signal that is M
samples long and can be repeated 1
to N
times.
#
OutputReverberation times
is the calculated reverberation times in F
bands. Default one band pr octave from 100 Hz to 4000 Hz.
#
AttributesAttribute | Value |
---|---|
Name | ISO3382NoiseMethod |
Mode | T30 |
Bands pr. octave | โ 1 |
Start frequency | โ 100 |
Stop frequency | โ 4000 |
Inputs | 2 |
Values with โ can receive external input.
#
NameName specifies the name of the block.
#
ModeMode specifies which type of reverberation time you want to calculate. You can choose between T60
, T30
, or T20
.
#
Bands pr. octaveBands pr. octave species the number of bands you want to output pr octave.
#
Start frequencyStart frequency specifies the frequency which should be in the first band.
#
Stop frequencyStop frequency specifies the frequency which should be in the last band.
#
InputsInputs specifies the number of inputs the block requires. Each input is a specific measurement position that are used.