Tone
Description#
The signal generator block tone can generate different types of tones.
Output#
The output is a single dimension Mx1 tone.
Attributes#
| Attribute | Value |
|---|---|
| Name | Tone |
| Settings | |
| Sample rate | 48000 Hz |
| Start | 0 s |
| Length | 1 s |
| Amplitude | 1 FS |
| Type | Sinusoid |
| Frequency | 1000 Hz |
| Outputs | 1 |
Name#
Name specifies the name of the block.
Sample rate#
Sample rate is the sample rate of the tone.
Start#
Start specifies when the tone should start. If start is above 0 s the start is zeropadded accordingly.
The start can be defined in either s, ms or samples.
Length#
Length specifies the length of the tone from start in either s, ms or samples.
Amplitude#
Amplitude is the amplitude (Peak) of the tone. As the signal is generated on the computer the unit is
defined as FS.
Type#
Type is the tone type. It can either be sinusoid or square.
Frequency#
Frequency is the frequency of the tone in Hz.
Outputs#
Outputs specifies the number of output(s) the block will have. Each output will output the same tone.
Examples#
A 5 Hz sinusoid and square tone with an amplitude of 1.
